2522 sismic veeer anchor free#

The Screw-On Anchor Plate is used for attaching brick veneer to a masonry backup wall with appropriate fasteners. The beveled head of the askew head bolt engages the internal wedge shape of the insert and produces an automatic tightening action when a load is placed on it. Screw-On Anchor Plate (315-D) 165.00 - 450.00. When the forms are stripped, the open face of the insert is flush with the concrete. Nail holes in the back of the insert allow easy nailing to forms.

Concrete Inserts BLOK-LOK Concrete Wedge inserts are embedded into concrete slabs.

They are placed where cracking is likely to occur due to excessive tensile stress.

Control Joints Control joint products are used to reduce restraint and permit longitudinal movement.

2522 sismic veeer anchor free#

Dovetail anchor with excessive free play greater than 3/8-inch. If a seismic condition exists, the live load can be 70 pounds or greater and the allowable load for the fastener can be 280 pounds. An important application of stress distribution joint reinforcement is to safeguard the integrity of masonry walls from unexpected and difficult-to-design-for events such as industrial explosions and accidents. Applying a 4:1 safety factor, an anchor allowable load greater than 225 pounds would be useful and marginally acceptable. Stress Distribution вЂ“ Continuous joint reinforcement is used to distribute stress concentrations that occur above and below windows, or where wall sections are reduced because of embedded columns, and below concentrated loads such as beams and slabs.

Wall Intersections вЂ“ Partition-LokВ® and Corner-LokВ® are prefabricated pieces of corner and tee joint reinforcement used to join masonry walls at intersections and corners. Applications of Joint Reinforcement Reinforced Masonry вЂ“ Joint reinforcement either alone or in conjunction with wider-spaced bond beams contributes to the area of steel requirements in reinforced masonry. Table A (page 2) shows wire size and properties for steel joint reinforcement material. For joint reinforcement to effectively distribute stress it must be adequately bonded through the mortar so that the masonry and reinforcement act together. Joint Reinforcement Joint reinforcement is installed in horizontal mortar joints of masonry for shrinkage stress control.Flex-O-LokВ® Ties Adjustable ties are recommended as a veneer or cavity wall tie to connect to structural steel.